45" Dual Hot and Cold Wide Format Roll Laminator
The RSH-1151 45” Wide Format Roll Laminator is a high quality, economically priced dual hot and cold laminator. This model is specifically designed for users to easily and professionally finish graphics 45" or smaller. Use for thermal and pressure lamination, encapsulation and mounting.
•The 45” wide entry is ideal for laminating, encapsulating and mounting wide format graphics.
•5/8” max nip permits laminating and mounting on substrates up to 5/8” thick.
•Simply use the quick notch system for nip gap adjustments for varying substrate thicknesses.
•9 memory channels for fast access to previously used speed and heat settings.
•Document guides for straight feeding of material.
•Auto-grip hubs allow for quick and easy replacement of laminating film.
•One laminator for both cold/ PSA and hot/thermal lamination.
•Fast, simple switch-over from thermal to pressure-sensitive.
•Encapsulation also available.
•The durable and sturdy frame construction and requires little assembly and minimal maintenance.
•Model has a compact design and comes with a dust cover to extend the life of the machine.
•The RSH-1151 comes with a 1 year part & labor (Rollers 6 months) warranty.
|Max. Laminating Width||45 inch|
|Film Core Size||Auto Grip 2.25'', 3''|
|Film Thickness||1-10 mil|
|Drive Motor||DC geared|
|Warm-Up Time (min.)||20 min (Hot)|
|Laminating Speed ft/min||Hot - 9.8ft/min, Cold - 13 ft/min|
|Temperature||Independent Adjustable Rollers Up To 320°F|
|Mounting||Up to 5/8" (15mm)|
|Take-Up System||Chain link to main motor|
|Transport Type||4 roller|
|Speed Control||Digital (9 settings)|
|Liner Take Up||Yes|
|Unit Depth (in.)||26|
|Unit Width (in.)||59|
|Unit Height (in.)||48|
|Unit Weight (lbs.)||363|
|Voltage||AC 200-220V/60Hz Single phase|
|Consumption (Watts)||3300 W|
|Warranty||1 year part & labor (Rollers 6 months)|